XDR95 Overall System Specifications

• Transmission Format: Line 6 proprietary digital audio transmission
• Frequency Response: 10 Hz - 20 kHz
• Audio Dynamic Range: Greater than 118 dB
• Distortion: 0.03% THD
• RF Carrier Frequency: 902 MHz to 928 MHz, FSK, dual frequency transmission
• Compatible Channels: Five
• RF Output Power: 15mw
• Audio Output Level: Unity gain with transmitter input
• Polarity: Positive voltage at input yeilds positive voltage at output
• Transmission Range: 300 feet line-of-sight (may vary due to local conditions)
• FCC Approval: Part 15 approved, no user-license required
• Operating Temperature Range: -20° to +85° C (-4° to +185° F)

XDT4 Transmitter Specifications

• A/D Conversion: 24-bit Delta Sigma, 128 times over sampling
• Input Impedance: 1.2 M-ohm instrument input, 10K-ohm mic input
• Connectors: 1/8" Unbalanced locking connector
• Controls: Power On/Off, Channel Select
• Five Segment LED Display: Power On, Channel, Battery Life, Audio Level Meter
• Dimensions (WxHxD): 2.4 x 4 x .8" (6.09 x 10.16 x 2.03 cm)
• Battery Life: 9V alkaline, switching power supply, two modes:
  Q-DiversityPLUS™ mode: ~5.5 hrs in (dual frequency)
  Q-Diversity™ mode: ~6.5 hrs in standard (single frequency)
• Weight: .25 lbs. (with 9V battery installed)
• Housing: Polycarbonate, impact tested to 300 lbs.

XDR4 Receiver Specifications

• D/A Conversion: 24-bit Delta Sigma, 128 times over sampling
• Output: 2.12V RMS (Unbalanced: 1.8K Ohm)
• Connectors: 1/4" Unbalanced TRS output 1.8K-ohm impedance, tip= instrument voicing, ring= full bandwidth, sleeve= ground, XLR Balanced 600 ohm
• LED Display: Power On, RF, Channel, Diversity, Battery Life, Audio Level Meter
• Controls: Power On/Off, Channel Up and Down
• Dimensions (WxHxD): 16.2 x 1.75 x 7.5" (41.14 x 4.44 x 19.05 cm)
• Power Requirements: 9V DC 500mA via included AC/DC adapter
• Weight: 2.5 lbs (with rack hardware and antenna installed)
• Housing: Polycarbonate, impact tested to 300 lbs.